The effect of temperature on the induction period in the photoinitiated polymerization of TRIPROPYLENE GLYCOL (cas 1638-16-0) diacrylate
-
Add time:07/29/2019 Source:sciencedirect.com
The effect of temperature on the kinetics of the photopolymerization of TRIPROPYLENE GLYCOL (cas 1638-16-0) diacrylate was studied by real-time FTIR–attenuated total reflection (ATR) spectroscopy. The temperature behaviour of the polymerization rate was found to be dependent on the photoinitiator used. The induction period strongly decreases with increasing temperature. It was shown by quantitative determination of the oxygen concentration that the decay of the induction period is solely due to the decreasing solubility of oxygen in the acrylate.
We also recommend Trading Suppliers and Manufacturers of TRIPROPYLENE GLYCOL (cas 1638-16-0). Pls Click Website Link as below: cas 1638-16-0 suppliers
Prev:Investigation of a tripropylene-glycol monomethyl ether and diesel blend for soot-free combustion in an optical direct-injection diesel engine
Next:Stabilisation of polyethylene and polypropylene glycol through inhibition of a β-positioned hydroxyl group relative to an ether group. A study of modified triethylene and TRIPROPYLENE GLYCOL (cas 1638-16-0)s) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Thermophysical characterization of aqueous ternary system containing n-tris-[hydroxymethyl]methyl-3-amino propanesulfonic acid and glycol (PG or DPG or TPG)08/01/2019
- Vapor–liquid equilibrium for propylene glycols binary systems: Experimental data and regression07/31/2019
- Stabilisation of polyethylene and polypropylene glycol through inhibition of a β-positioned hydroxyl group relative to an ether group. A study of modified triethylene and TRIPROPYLENE GLYCOL (cas 1638-16-0)s07/30/2019
- Investigation of a tripropylene-glycol monomethyl ether and diesel blend for soot-free combustion in an optical direct-injection diesel engine07/28/2019
- Density and vapour pressure of mixed-solvent desiccant systems (propylene glycol or dipropylene glycol or TRIPROPYLENE GLYCOL (cas 1638-16-0) + magnesium chloride + water)07/27/2019
- A TRIPROPYLENE GLYCOL (cas 1638-16-0) Diacrylate-based Polymeric Support Ink for Material Jetting07/26/2019
- Vapour-liquid equilibrium for TRIPROPYLENE GLYCOL (cas 1638-16-0) + aromatic hydrocarbons binary systems: Measurements and modelling07/25/2019
- Investigation of the effects of TRIPROPYLENE GLYCOL (cas 1638-16-0) addition to diesel fuel on combustion and exhaust emissions at an isolated diesel engine07/24/2019
-
Health and Chemical more >