Direct preparation of sodium stannate from lead refining dross after NaOH roasting-water leaching

Add time:07/28/2019    Source:sciencedirect.com

Sodium stannate (Na2SnO3·3H2O) has been widely applied in the field of electroplating and flame retardants preparation. In general, Na2SnO3·3H2O is mainly prepared from cassiterite or metallic tin, which has the problems of high production costs and natural mineral shortage. This study investigated a combined process of roasting, leaching, purification, and evaporating-crystallizing to prepare Na2SnO3·3H2O directly from lead refining dross. The effects of roasting process parameters (NaOH dosage, roasting temperature, and time) and leaching process parameters (leaching temperature, leaching time, liquid-to-solid ratio, and stirring speed) on the leaching efficiency of tin were detailly investigated. The results showed that about 93.5% of tin was converted into sodium stannate after NaOH roasting and thus could be leached out by water leaching. The optimized conditions have been established as: mass ratio of NaOH to the dross of 1.4 during roasting at 450 °C for 60 min and leaching at 75 °C for 90 min with 10 mL/g liquid-to-solid ratio and 300 r/min stirring speed. Meanwhile, the antimony was separated into the leaching residue, in which the content of antimony reached 31.32%. Thereafter, the leachate was purified by sulfide precipitation with Na2S. The purified solution was then subjected to an evaporating and crystallizing process for the preparation of Na2SnO3·3H2O.

We also recommend Trading Suppliers and Manufacturers of CALCIUM STANNATE (cas 12013-46-6). Pls Click Website Link as below: cas 12013-46-6 suppliers

Prev:Photoluminescence of Pr3+-doped calcium and strontium stannates
Next:Chemical synthesis of CALCIUM STANNATE (cas 12013-46-6)s from peroxo precursors)