A novel emulsion fuel containing aqueous nano cerium oxide additive in diesel–biodiesel blends to improve diesel engines performance and reduce exhaust emissions: Part I – Experimental analysis
-
Add time:07/16/2019 Source:sciencedirect.com
Improving fuel combustion in engines and consequently reducing environmentally-unfavorable emissions is of prominent importance in addressing some of the main challenges of the current century, i.e., global warming and climate change. Fuel additives are considered as efficient way for improving fuel properties and to diminish engine emissions. In line with this, the present research was focused on the simultaneous application of water (3, 5, and 7 wt.%) and cerium oxide nano particles (90 ppm) as metal-based additive into biodiesel/diesel fuel blend (B5) and their impacts on the performance and emission characteristics of a single cylinder four stroke diesel engine were investigated. The findings revealed that the aqueous nano-emulsion of cerium oxide improved the overall combustion quality. More specifically, the brake specific fuel consumption (bsfc) of B5 containing 3% water and 90 ppm cerium oxide (B5W3m) was measured 5% and 16% lower than those of neat B5 and neat B5 containing 3% water (B5W3), respectively. Moreover, the B5W3m fuel blend increased brake thermal efficiency (bte) by over 23 and 11% compared with B5W3 and B5, respectively. B5W3m also considerably reduced CO, HC, and NOx emissions by 51, 45, and 27% compared with B5W3. To the best of our knowledge, this is the first report exploring the impacts of low-level water containing cerium oxide in B5 on engine performance and emission characteristics.
We also recommend Trading Suppliers and Manufacturers of cerium(4+) stearate (cas 7459-41-8). Pls Click Website Link as below: cas 7459-41-8 suppliers
Prev:Thermal behavior and decomposition of cerium(III) butanoate, pentanoate and hexanoate salts upon heating in argon
Next:Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Cerium (IV)-based chemiluminescence analysis of hydrochlorothiazide07/21/2019
- Effect of benzil and cobalt stearate on the aging of low-density polyethylene films07/19/2019
- Mn2Al-LDH- and Co2Al-LDH-stearate as photodegradants for LDPE film07/18/2019
- Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle07/17/2019
- Thermal behavior and decomposition of cerium(III) butanoate, pentanoate and hexanoate salts upon heating in argon07/15/2019
- Effect of neodymium stearate on cure and mechanical properties of epoxidized natural rubber07/14/2019
- Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant07/13/2019
- Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection07/12/2019
- Cerium ion promotes the osteoclastogenesis through the induction of reactive oxygen species07/11/2019


