Lanthanide-alkali double sulfate precipitation from strong sulfuric acid NiMH battery waste leachate

Add time:08/01/2019    Source:sciencedirect.com

In NiMH battery leaching, rare earth element (REE) precipitation from sulfate media is often reported as being a result of increasing pH of the pregnant leach solution (PLS). Here we demonstrate that this precipitation is a phenomenon that depends on both Na+ and SO42− concentrations and not solely on pH. A two-stage leaching for industrially crushed NiMH waste is performed: The first stage consists of H2SO4 leaching (2 M H2SO4, L/S = 10.4, V = 104 ml, T = 30 °C) and the second stage of H2O leaching (V = 100 ml, T = 25 °C). Moreover, precipitation experiments are separately performed as a function of added Na2SO4 and H2SO4. During the precipitation, higher than stoichiometric quantities of Na to REE are utilized and this increase in both precipitation reagent concentrations results in an improved double sulfate precipitation efficiency. The best REE precipitation efficiencies (98–99%) – achieved by increasing concentrations of H2SO4 and Na2SO4 by 1.59 M and 0.35 M, respectively – results in a 21.8 times Na (as Na2SO4) and 58.3 times SO4 change in stoichiometric ratio to REE. Results strongly indicate a straightforward approach for REE recovery from NiMH battery waste without the need to increase the pH of PLS.

We also recommend Trading Suppliers and Manufacturers of PRASEODYMIUM SULFATE HYDRATE (cas 10277-44-8). Pls Click Website Link as below: cas 10277-44-8 suppliers

Prev:The behaviour of the rare earth elements during the precipitation of ferrihydrite from sulphate media
Next:Lanthanum(III) and praseodymium(III) derivatives with dithiocarbamates derived from α-amino acids)