Electrodialytic separation of boric and hydrochloric acids

Add time:07/29/2019    Source:sciencedirect.com

Regeneration of boron-selective sorbents produces the acidic effluents of high boron content. Electrodialysis was proposed as a method for hydrochloric acid regeneration from the effluents composed of 0.1 kmol/m3 hydrochloric acid and boric acid concentration ranging from 0.1 to 2.5 kg B/m3. Boric acid mass transfer across anion-exchange membranes was investigated using a bench-scale electrodialyzer of an effective membrane area of 16 cm2. An extended Nernst–Planck model was used for transport parameters estimation. Comparison of Neosepta AMX and ACM membranes showed that boric acid transport across the latter is much slower, allowing more effective separation of hydrochloric and boric acids. The boric acid transport in the investigated case is mainly due to diffusion of boric acid across the membrane.

We also recommend Trading Suppliers and Manufacturers of Boric acid, calcium salt (cas 12040-58-3). Pls Click Website Link as below: cas 12040-58-3 suppliers

Prev:Failure analysis on premature fracture of boric acid recycle pump shaft in 1000 MW nuclear power plant
Next:An empirical kinetic model for calcium removal from calcium impurity-containing saturated boric acid solution by ion exchange technology using Amberlite IR–120 resin)