The influence of chemical composition of Ni-based alloys on microstructure and mechanical properties of plasma paste borided layers

Add time:07/30/2019    Source:sciencedirect.com

Plasma paste boriding at temperature of 800 °C (1073 K) for 3 h was applied in order to produce hard ceramic phases on the surface of Ni-based alloys with various chromium concentrations. The microstructure of boride layer depended on the chemical composition of substrate material. The increase in chromium concentration was the reason for reducing the average thickness of the boride layers. Hence, the average thicknesses were as follows: 54.24 ± 3.07 μm for Nickel 201-alloy, 44.41 ± 2.24 μm for Inconel®600-alloy, 41.31 ± 1.56 μm for Nimonic®80A-alloy. The chemical and phase composition of the investigated layers strongly influenced their hardness (HVIT), Young's modulus (EIT) and fracture toughness (Kc). The boride layer, produced on Nickel 201-alloy, was characterized by lowest average hardness of 17.97 ± 1.59 GPa and Young's modulus of 217.89 ± 20.72 GPa. The highest values of HIT and EIT (22.96 ± 4.30 GPa and 291.95 ± 25.64 GPa, respectively) were obtained for boride layer on Nimonic®80A-alloyin which the highest chromium concentration occurred. It was also confirmed that the increase in chromium concentration in substrate material strongly influenced the fracture toughness of the produced layers. The plasma-paste borided layer, in which only nickel borides were identified, was characterized by the highest average fracture toughness (Kc) of 1.477 ± 0.86 MPa·m1/2. Whereas, the boride layer on Nimonic®80A-alloy (Cr content of 19.52 wt%) was characterized by about tree time lower fracture toughness (Kc = 0.534 ± 0.44 MPa·m1/2).

We also recommend Trading Suppliers and Manufacturers of ALUMINUM BORIDE (cas 12041-50-8). Pls Click Website Link as below: cas 12041-50-8 suppliers

Prev:Interfacial morphology and tribo-corrosion behaviour of Fe-15.3 wt % Cr-3.1 wt % B-6.2 wt % Mo alloy in molten aluminium
Next:The influence of trace elements on the microstructures and properties of the aluminum conductors)