Removal of hydrated silica, fluoride and arsenic from groundwater by electrocoagulation using a continuous reactor with a twelve-cell stack

Add time:08/02/2019    Source:sciencedirect.com

The simultaneous removal of hydrated silica, fluoride and arsenic from deep well water (hydrated silica 72 mgL−1, fluoride 4.4 mgL−1, arsenic 106.2 μgL−1, sulfate 50 mgL−1, phosphate 0.99 mgL−1, pH = 8.2 and conductivity 659 μScm−1) by electrocoagulation (EC) was investigated. The EC was performed in a continuous electrochemical reactor using aluminum plates as sacrificial anodes coupled directly to a jar test device. The effect of current density (4 ≤ j ≤ 8 mA cm−2) and mean linear flow rates in the EC reactor (0.057 ≤ u ≤ 0.57 cm s−1) on the hydrated silica, fluoride, and arsenic removal efficiencies was analyzed. The abatement of hydrated silica was obtained at 8 mA cm−2 and 0.057 cm s−1, while the residual concentrations of F− and As after the same electrolysis were 0.19 mg L−1 and 9.8 μg L−1, satisfying the WHO guidelines for F− (≤1.5 mg L−1) and As (≤10 μg L−1). Spectroscopic analyses on aluminum flocs revealed that they are predominantly composed of aluminum silicates. Arsenates adsorb on aluminum flocs and fluoride replaces a hydroxyl group from aluminum aggregates.

We also recommend Trading Suppliers and Manufacturers of ARSENIC(V) OXIDE HYDRATE (cas 12044-50-7). Pls Click Website Link as below: cas 12044-50-7 suppliers

Prev:Formation of active Fe(OH)3 in situ for enhancing arsenic removal from water by the oxidation of Fe(II) in air with the presence of CaCO3
Next:High-performance iron oxide–graphene oxide nanocomposite adsorbents for arsenic removal)