Characterisation of titanium–TITANIUM BORIDE (cas 12045-63-5) composites processed by powder metallurgy techniques

Add time:07/30/2019    Source:sciencedirect.com

In this work, a detailed characterisation of titanium–titanium boride composites processed by three powder metallurgy techniques, namely, hot isostatic pressing, spark plasma sintering and vacuum sintering, was conducted. Two composites with different volume percents of titanium boride reinforcement were used for the investigation. One was titanium with 20% titanium boride, and the other was titanium with 40% titanium boride (by volume). Characterisation was performed using X-ray diffraction, electron probe micro analysis — energy dispersive spectroscopy and wavelength dispersive spectroscopy, image analysis and scanning electron microscopy. The characterisation results confirm the completion of the titanium boride reaction. The results reveal the presence of titanium boride reinforcement in different morphologies such as needle-shaped whiskers, short agglomerated whiskers and fine plates. The paper also discusses how mechanical properties such as microhardness, elastic modulus and Poisson's ratio are influenced by the processing techniques as well as the volume fraction of the titanium boride reinforcement.

We also recommend Trading Suppliers and Manufacturers of TITANIUM BORIDE (cas 12045-63-5). Pls Click Website Link as below: cas 12045-63-5 suppliers

Prev:Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism
Next:Growth kinetics and some mechanical properties of two-phase boride layers produced on commercially pure titanium during plasma paste boriding)