Gibbs energy of formation of bismuth(III) oxide
-
Add time:07/27/2019 Source:sciencedirect.com
The standard Gibbs energy of formation of Bi2O3 has been measured using a solid-state cell incorporating yttria-stabilized zirconia as the electrolyte and pure oxygen as the reference electrode. An innovative cell design, with a buffer electrode to absorb the electrochemical flux of oxygen through the electrolyte caused by trace electron/hole conduction, was used to measure the oxygen chemical potential over phase mixture Bi + Bi2O3 in the temperature range from 800 to 1473 K. A closed cell was used to avoid possible deviations from equilibrium caused by vaporization of bismuth and oxides of bismuth. The results for α-Bi2O3 in the temperature range from 800 to 1002 K can be summarized by,ΔGfo(±230)/Jmol−1=−584235+289.28(T/K)For δ-Bi2O3 in the temperature range from 1002 to 1078 K:ΔGfo(±230)/Jmol−1=−553669+258.77(T/K)The results are discussed in relation to thermodynamic information reported in the literature.
We also recommend Trading Suppliers and Manufacturers of BISMUTH(III) OXIDE (cas 12048-50-9). Pls Click Website Link as below: cas 12048-50-9 suppliers
Prev:Hydrothermal synthesis and crystal structure of a new lithium copper bismuth oxide, LiCuBiO4
Next:Mixed radiation shielding via 3-layered polydimethylsiloxane rubber composite containing hexagonal boron nitride, boron (III) oxide, bismuth (III) oxide for each layer) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Influence of bismuth oxide on gamma radiation shielding properties of boro-tellurite glass08/01/2019
- Synthesis and structural characterization of new bismuth (III) nano coordination polymer: A precursor to produce pure phase nano-sized bismuth (III) oxide07/31/2019
- Sonochemical synthesis of bismuth(III) oxide decorated reduced graphene oxide nanocomposite for detection of hormone (epinephrine) in human and rat serum07/30/2019
- Monte Carlo simulations of radioactive waste encapsulated by bisphenol-A polycarbonate and effect of bismuth-III oxide filler material07/29/2019
- Mixed radiation shielding via 3-layered polydimethylsiloxane rubber composite containing hexagonal boron nitride, boron (III) oxide, bismuth (III) oxide for each layer07/28/2019
-
Health and Chemical more >


