Effects of structures of molybdenum catalysts on selectivity in gas-phase propylene oxidation

Add time:08/04/2019    Source:sciencedirect.com

Molybdenum-based catalysts for the gas-phase oxidation of propylene with air were investigated. Various types of silica-supported molybdenum oxide and molybdenum-bismuth mixed oxide catalysts were prepared from inorganic and organometallic molybdenum precursors using wet impregnation and physical vapor deposition methods. The epoxidation activities of the prepared catalysts showed direct correlations with their nanostructures, which were identified using transmission electron microscopy. The appearance of a partly or fully crystalline molybdenum oxide phase, which interacted poorly with the silica support, decreased the selectivity for propylene oxide formation to below 10%; non-crystalline octahedrally coordinated molybdenum species anchored on the support gave propylene oxide formations greater than 55%, with 11% propylene conversion. Electrochemical characterization of molybdenum oxides with various morphologies showed the importance of structural defects. Direct promotion by bismuth of the epoxidation reactivities over molybdenum oxides is disputed.

We also recommend Trading Suppliers and Manufacturers of BISMUTH MOLYBDENUM OXIDE (cas 12048-83-8). Pls Click Website Link as below: cas 12048-83-8 suppliers

Prev:ToF-SIMS investigation of absorption of lead and bismuth in T91 steel deformed in liquid lead bismuth eutectic
Next:A study of a reduction of a micro- and nanometric bismuth oxide in hydrogen atmosphere)