Condensation of pentose-derived furan compounds to C15 fuel precursors using supported phosphotungstic acid catalysts: Strategy for designing heterogeneous acid catalysts based on the acid strength and pore structures

Add time:07/30/2019    Source:sciencedirect.com

The selective condensation of 2-methylfuran and furfural to C15 compounds is performed using supported phosphotungstic acid catalysts in a continuous-flow fixed-bed reactor. The formation of unwanted viscous tetramers (C20) is suppressed when the continuous-flow reaction system is used. Stronger acids, as measured by pKa, improved the condensation of furans, but the number of acid sites was rather weakly correlated with the catalytic activity. Suppressed catalytic activity in tiny pores smaller than 2.8–6.3 nm was also observed. Based on the observations of the acidity and pore structures, a strategy with which to design optimum catalysts for the condensation of furan compounds is suggested.

We also recommend Trading Suppliers and Manufacturers of Phosphotungstic acid 44-hydrate (cas 12067-99-1). Pls Click Website Link as below: cas 12067-99-1 suppliers

Prev:Fabrication and characterization of phosphotungstic acid - Copper oxide nanoparticles - Plastic waste nanocomposites for enhanced radiation-shielding
Next:Aluminum doped solid acid with suitable ratio of Brønsted and Lewis acid sites synthesized by electric-flocculation of phosphotungstic acid via hydrothermal treatment for producing 5-hydroxymethylfurfural from glucose)