Understanding the mechanism for the mechanical property degradation of a lithium disilicate glass-ceramic by annealing
-
Add time:07/31/2019 Source:sciencedirect.com
Post-crystallization annealing above the Tg was applied to a lithium disilicate glass-ceramic with microstructure consisting of glassy matrix and rod-like lithium disilicate crystals, effect of the annealing on the mechanical behavior was investigated. Flexural strength and VIF toughness of the glass-ceramic unexpectedly decreased after the annealing. The mechanical behavior variation was understood based on residual micro-stress analysis. Coefficient of thermal expansion for the glassy matrix presented a tendency to increase after the annealing, which would enlarge the thermal expansion mismatch between the glassy matrix and the lithium disilicate crystals. As a result, the residual micro-stresses in the glass-ceramic abnormally increased with increasing the annealing time. The mechanical property degradation was attributed to the annealing-induced increase of the residual micro-stresses.
We also recommend Trading Suppliers and Manufacturers of aluminium potassium disilicate (cas 12068-38-1). Pls Click Website Link as below: cas 12068-38-1 suppliers
Prev:High-temperature interactions of desert sand CMAS glass with yttrium disilicate environmental barrier coating material
Next:The effect of Ca2+ and Al3+ additions on the stability of potassium disilicate glass as a soot oxidation catalyst) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Influence of ZrO2 on the crystallization and properties of lithium disilicate glass-ceramics derived from a multi-component system08/06/2019
- Studies of crystal phase formations in high-strength lithium disilicate glass–ceramics08/05/2019
- Synthesis and properties of lithium disilicate glass-ceramics in the system SiO2–Al2O3–K2O–Li2O08/04/2019
- Controlled precipitation of lithium disilicate (Li2Si2O5) and lithium niobate (LiNbO3) or lithium tantalate (LiTaO3) in glass-ceramics08/03/2019
- Strengthening of a lithium disilicate glass-ceramic by rapid cooling08/02/2019
- The effect of Ca2+ and Al3+ additions on the stability of potassium disilicate glass as a soot oxidation catalyst08/01/2019
- High-temperature interactions of desert sand CMAS glass with yttrium disilicate environmental barrier coating material07/30/2019
- Evaluation of the ceramic liner bonding effect between zirconia and lithium disilicate07/29/2019
- Mechanical and bioactive properties of lithium disilicate glass-ceramic mixtures synthesized by two different methods07/28/2019
-
Health and Chemical more >