Comparison of strontium and calcium adsorption onto composite magnetic particles derived from Fe3O4 and bis(trimethoxysilylpropyl)amine
-
Add time:07/15/2019 Source:sciencedirect.com
The adsorption of strontium and calcium ions by composite magnetic particles derived from Fe3O4 and bis(trimethoxysilylpropyl)amine (TSPA) were comparatively studied. The effects of initial solution pH, ionic strength, initial strontium and calcium ion concentration, and temperature on the equilibrium adsorption amount of both strontium and calcium ions, and on the separation factor between strontium and calcium ions were investigated comprehensively. The adsorption occurs rapidly in the first 30 min. In general, the equilibrium adsorption amount of both strontium and calcium ions was found to increase with the increase in initial ion concentration and initial solution pH, but to decrease gradually with the increase in ionic strength. The equilibrium adsorption amount of strontium ions increases with the increase in adsorption temperature. However, the effect of temperature on the adsorption of calcium ions presents a complicated situation. Strontium ions have a higher affinity to the composite particles than calcium ions. The separation factor between strontium and calcium ions increases with the increase in adsorption temperature, but is not sensitive to ionic strength. The suitable experimental conditions for the separation between strontium and calcium ions are: initial solution pH 7–8, lower ionic strength, and higher adsorption temperature.
We also recommend Trading Suppliers and Manufacturers of Bis(trimethoxysilylpropyl)amine (cas 82985-35-1). Pls Click Website Link as below: cas 82985-35-1 suppliers
Prev:Morphology and water resistance of mixed silane films of bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine
Next:Enhanced corrosion resistance of AA 2024-T3 and hot-dip galvanized steel using a mixture of bis-[triethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Tailoring amine functionalized hybrid ceramics to control CO2 adsorption07/17/2019
- Enhanced corrosion resistance of AA 2024-T3 and hot-dip galvanized steel using a mixture of bis-[triethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine07/16/2019
- Morphology and water resistance of mixed silane films of bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine07/14/2019
- Boron adsorption mechanism of a hybrid gel derived from tetraethoxysilane and bis(trimethoxysilylpropyl)amine07/13/2019
- Bis(trimethoxysilylpropyl)amine and tetraethoxysilane derived gels as effective controlled release carriers for water-soluble drugs of small molecules07/12/2019
- Corrosion protection of metals by water-based silane mixtures of bis-[trimethoxysilylpropyl]amine and vinyltriacetoxysilane07/11/2019


