Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms

Add time:07/31/2019    Source:sciencedirect.com

Copper and zinc are routinely used in livestock antimicrobial footbaths in commercial farming. The footbath mix is a cost to farmers, and the disposal of spent footbath into slurry tanks leads to soil contamination, as well as the potential for antimicrobial metal resistance and co-selection. This study assesses the potential to mitigate a source of antimicrobial metal resistance in slurry tanks while recovering copper and zinc from spent cattle footbaths. This is the first study in literature to investigate the potential of recovering copper from cattle footbath solutions via any method. The sorbent, Ca2Al-EDTA Layered Double Hydroxides (LDH), were used to remove Cu2+ from a Cu2SO4·5H20 solution at different temperatures. The maximum Cu2+ uptake from the Cu2SO4·5H20 solution was 568 ± 88 mg g−1. Faster and higher equilibrium uptake was achieved by increasing the temperature of the solution. The sorbent was found to be effective in removing copper and zinc from a commercially available cattle footbath solution (filtered footbath solution Cu2+ uptake 283 ± 11.05 mg g−1, Zn2+ uptake 60 ± 0.05 mg g−1). Thus, this study demonstrates the opportunity for a completely novel and potentially economically beneficial method of mitigating antimicrobial resistance in agriculture and the environment, while also providing a new valuable copper and zinc waste stream for secondary metal production.

We also recommend Trading Suppliers and Manufacturers of COPPER(I)HYDROXIDE (cas 12125-21-2). Pls Click Website Link as below: cas 12125-21-2 suppliers

Prev:Tank mix application of copper hydroxide either with cyproconazole or pyraclostrobin fungicides reduced the control of coffee leaf rust
Next:Core-shell copper oxide @ nickel/nickel–iron hydroxides nanoarrays enabled efficient bifunctional electrode for overall water splitting)