Reduced graphene oxide-spinel ferrite nano-hybrids as magnetically separable and recyclable visible light driven photocatalyst
-
Add time:08/03/2019 Source:sciencedirect.com
High quality magnetically separable Ni0.65Zn0.35Fe2O4 nanoparticles were synthesized by surfactant assisted co-precipitation method. Spinel structure of these ferrite nanoparticles was confirmed by X-ray diffraction (XRD). Reduced graphene oxide (rGO) was prepared by wet chemical approach and then utilized to make the composites with ferrite nanoparticles. The successful homogenous distribution of ferrites nanoparticles onto the graphene sheets was observed by scanning electron microscopic (SEM) analysis. The [email protected] composite exhibited the strong absorption in visible region as observed by UV–vis measurements. Optical band gap studies confirmed that the prepared spinel ferrite Ni0.65Zn0.35Fe2O4 nanoparticles can be utilized for visible light driven photocatalytic activity studies. The optical (direct) band gap for Ni0.65Zn0.35Fe2O4 nanoparticles as calculated by Tauc plot was found 1.91 eV. This bandgap lies in the visible region i.e. < 3.0 eV. The band gap of ferrite nanoparticles was reduced to 1.84 eV when they were mixed with rGO to prepare the nano-hybrids. The photocatalytic activity of the ferrite nanoparticles was analyzed by photochemical decomposition of methylene blue (MB) under visible light irradiation. Photocatalytic activity of Ni0.65Zn0.35Fe2O4@rGO nano-hybrids was found better as compared to bare nanoparticles. Improved photodegradation of MB by NiZnFe2O4/rGO was ascribed due to effective separation of photo-generated electron-hole pairs. The ferrite nanoparticles exhibit ferromagnetic nature; therefore they can be recovered easily by conventional magnets. Thus these ferrite nanoparticles and their nano-hybrids with rGO can be recycled and reused easily.
We also recommend Trading Suppliers and Manufacturers of Potassium ferrite 22 (cas 12160-44-0). Pls Click Website Link as below: cas 12160-44-0 suppliers
Prev:Synthesis, Characterization and Biocompatibility of Potassium Ferrite Nanoparticles
Next:Composite ferrite catalyst for ethylbenzene dehydrogenation: Enhancement of potassium stability and catalytic performance by phase selective doping) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Nickel substituted cadmium ferrite as room temperature operable humidity sensor08/08/2019
- Powder reduction kinetics of dicalcium ferrite, calcium ferrite, and hematite: Measurement and modeling08/07/2019
- Synthesis and characterization of nanosized MnZn ferrites via a modified hydrothermal method08/06/2019
- Manganese and zinc ferrite based graphene nanocomposites for electrochemical hydrogen evolution reaction08/05/2019
- Composite ferrite catalyst for ethylbenzene dehydrogenation: Enhancement of potassium stability and catalytic performance by phase selective doping08/04/2019
- Synthesis, Characterization and Biocompatibility of Potassium Ferrite Nanoparticles08/02/2019
- Silica/potassium ferrite nanocomposite: Structural, morphological, magnetic, thermal and in vitro cytotoxicity analysis08/01/2019
- Effect of Ni-Ferrite and Ni-Co-Ferrite nanostructures on biogas production from anaerobic digestion07/31/2019
- Potassium-promoted magnesium ferrite on 3D porous graphene as highly efficient catalyst for CO hydrogenation to lower olefins07/30/2019
-
Health and Chemical more >
-
Related Products
- Potassium (2S,3S)-3-(ethoxycarbonyl)oxirane-2-carboxylate
- Potassium (4-formylphenyl)trifluoroborate
- Potassium (bromomethyl)trifluoroborate
- Potassium (R)-((3-ethoxy-1-methyl-3-oxoprop-1-enyl)amino)(4-hydroxyphenyl)acetate
- Potassium (R)-(4-hydroxyphenyl)((3-methoxy-1-methyl-3-oxoprop-1-enyl)amino)acetate
- Potassium (R)-[(3-ethoxy-1-methyl-3-oxoprop-1-enyl)amino]phenylacetate
- Potassium [(cyanomethyl)thio]acetate
- Potassium 1,2,3,6-tetrahydro-5-nitro-2,6-dioxopyrimidine-4-carboxylate
- Potassium 2,2-dimethyl-1,3-dioxolane-4-carboxylate
- Potassium 2,3,3-trimethyl-3H-indole-5-sulfonate


