All-fiber 2 μm thulium-doped mode-locked fiber laser based on MoSe2-saturable absorber
-
Add time:07/30/2019 Source:sciencedirect.com
We demonstrate an all-fiber passive mode-locking laser operating in the 2 μm region that is implemented using a MoSe2-based saturable absorber (SA). A MoSe2-polyvinyl alcohol (PVA) SA is prepared with a modulation depth of 4.98%, a saturation intensity of 168.6 MW/cm2 and a nonsaturable loss of 29.6%. When the MoSe2-PVA SA was inserted into the fiber laser cavity, highly stable self-starting soliton pulse trains were generated with a center wavelength of 1943.35 nm and a 3 dB bandwidth of 4.38 nm. The pulse waveform has a sech2 profile with pulse duration of 980 fs. The fundamental repetition rate is 23.53 MHz and the signal-to-background ratio of the fundamental frequency ranges up to 65 dB. The production of stable and robust pulses using this laser indicates that the MoSe2-PVA SA is suitable for generation of 2 μm femtosecond ultrashort pulses.
We also recommend Trading Suppliers and Manufacturers of THULIUM SULFIDE (cas 12166-30-2). Pls Click Website Link as below: cas 12166-30-2 suppliers
Prev:Growth and characterization of iron SCANDIUM SULFIDE (cas 12166-29-9) (FeSc2S4)
Next:Quantitative analysis of energy transfer processes in Thulium–Bismuth germanate co-doped fiber amplifier) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Amorphous Tm3+ doped sulfide thin films fabricated by sputtering08/04/2019
- Charge compensation and polytypism influences on thulium fluorescence in zinc sulfide08/03/2019
- A single crystal structure determination of Tm15S22 — a new THULIUM SULFIDE (cas 12166-30-2)08/02/2019
- Biodesulfurization of sulfide wastewater for elemental sulfur recovery by isolated Halothiobacillus neapolitanus in an internal airlift loop reactor08/01/2019
- Quantitative analysis of energy transfer processes in Thulium–Bismuth germanate co-doped fiber amplifier07/31/2019
-
Health and Chemical more >


