Controlled crystal phase and particle size of loaded-TiO2 using clinoptilolite (cas 12173-10-3) as support via hydrothermal method for degradation of crystal violet dye in aqueous solution
-
Add time:08/05/2019 Source:sciencedirect.com
TiO2-supported clinoptilolite (cas 12173-10-3)s (TiO2/clinoptilolites) were successfully synthesized with controlled crystal phase and particle size via hydrothermal method to enhance photocatalytic performance of TiO2. The effects of various parameters including temperature, acidity and concentration of Ti-containing solutions on the particle size, crystal phase and agglomeration of TiO2 supported on clinoptilolite were investigated thoroughly by characterizations of X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), BET isotherm, UV–visible (UV–vis) spectrophotometer and Malvern zetasizer. The results demonstrate that increasing temperature and strengthen acidity are beneficial to enhance the crystallinity and particle size of supported TiO2. Increase in acidity also leads to more uniform distribution of TiO2 on the surface of clinoptilolite. The TiO2 nano-crystals deposited on the surface of clinoptilolite, exhibit rutile or anatase phase, strongly depending on the preparation procedure. The resultant TiO2/clinoptilolites could be used as photo-catalysts for the degradation of crystal violet (CV) dye in aqueous solution, showing a higher photo-catalytic activity with 89% degradation within 100 min. The effect of operational parameters, such as pH values of reaction media, dose of used catalyst, and concentration of CV dye on the CV degradation performance were investigated, in which the kinetics of CV dye degradation was found to follow the pseudo-first order kinetic model.
We also recommend Trading Suppliers and Manufacturers of clinoptilolite (cas 12173-10-3). Pls Click Website Link as below: cas 12173-10-3 suppliers
Prev:Removal of Zn2+, Pb2+, Cd2+, and Cu2+ from aqueous solution by synthetic clinoptilolite (cas 12173-10-3)
Next:clinoptilolite (cas 12173-10-3) tailored to methane or nitrogen selectivity through different temperature treatment) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Catalytic activity of SnO2- and SO4/SnO2-containing clinoptilolite (cas 12173-10-3) in the esterification of levulinic acid08/09/2019
- Enhanced removal of ammonium from the aqueous solution using a high-gravity rotating packed bed loaded with clinoptilolite (cas 12173-10-3)08/08/2019
- Hydrogen (H2) adsorption on natural and cation-exchanged clinoptilolite (cas 12173-10-3), mordenite and chabazite08/07/2019
- clinoptilolite (cas 12173-10-3) tailored to methane or nitrogen selectivity through different temperature treatment08/06/2019
- Removal of Zn2+, Pb2+, Cd2+, and Cu2+ from aqueous solution by synthetic clinoptilolite (cas 12173-10-3)08/04/2019
- The effect of Ag+ cations on the micropore properties of clinoptilolite (cas 12173-10-3) and related adsorption separation of CH4 and N2 gases08/03/2019
- Understanding catalytic effects of bentonite/clinoptilolite (cas 12173-10-3) on biomass pyrolysis08/02/2019
- clinoptilolite (cas 12173-10-3) foams prepared by alkali activation of natural zeolite and their post-synthesis modifications08/01/2019
- Structural investigation of raw clinoptilolite (cas 12173-10-3) over the Pb2+ adsorption process from phosphoric acid07/31/2019


