Thermodynamic properties of mixed-layer ILLITE (cas 12173-60-3)-smectite by calorimetric methods: Acquisition of the enthalpies of mixing of ILLITE (cas 12173-60-3) and smectite layers
-
Add time:08/02/2019 Source:sciencedirect.com
The stability of ILLITE (cas 12173-60-3)-smectite interstratified with respect to discrete illite and smectite minerals was investigated by measuring their thermodynamic properties. The standard thermodynamic properties of the illite-smectite ISCz-1 mineral (G, H, S, Cp, and V) were determined between 298.15 K and 375 K by using calorimetric methods. Moreover, the enthalpies of mixing between the illite and smectite layers were measured at 298.15 K by acid solution calorimetry from a complete series of illite-smectite interstratified minerals (Shinzan area, Japan). The measured values were slightly negative, with a minimum value of −3.7 kJ.mol−1. This contributed to the stability of the mixed-layer with respect to a mechanical mixture of illite and smectite. In addition, the model from Blanc et al. (2015) was implemented to estimate the thermodynamic properties of the interstratified illite-smectite ISCz-1 mineral. The predicted values were consistent with the experimental results. However, the estimates were slightly improved by considering the thermodynamic properties of the mixture of the illite and smectite components and then adding the terms of energies of mixing. This could be confirmed by establishing the stability domains of ISCz-1 and those of the corresponding illite and smectite end-members according to Meunier and Velde’s determination of the smectite to illite reaction pathways (Meunier and Velde, 1989).
We also recommend Trading Suppliers and Manufacturers of ILLITE (cas 12173-60-3). Pls Click Website Link as below: cas 12173-60-3 suppliers
Prev:Modification of ILLITE (cas 12173-60-3) with calcium pimelate and its influence on the crystallization and mechanical property of isotactic polypropylene
Next:Application of differently treated ILLITE (cas 12173-60-3) and ILLITE (cas 12173-60-3) clay samples for the development of ceramics) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- The feasibility of using bentonite, ILLITE (cas 12173-60-3), and zeolite as capping materials to stabilize nutrients and interrupt their release from contaminated lake sediments08/09/2019
- Rapid green synthesis of ZSM-5 zeolite from leached ILLITE (cas 12173-60-3) clay08/08/2019
- Nuclear magnetic resonance and theoretical simulation study on Cs ion co-adsorbed with other alkali cations on ILLITE (cas 12173-60-3)08/07/2019
- Adsorption of strontium and caesium onto an Na-ILLITE (cas 12173-60-3) and Na-ILLITE (cas 12173-60-3)/Na-smectite mixtures: Implementation and application of a multi-site ion-exchange model08/06/2019
- Alkali activation behaviour of un-calcined montmorillonite and ILLITE (cas 12173-60-3) clay minerals08/05/2019
- Combining finite strain analysis and ILLITE (cas 12173-60-3) crystallinity to examine strain variation in a shale detachment zone08/04/2019
- Application of differently treated ILLITE (cas 12173-60-3) and ILLITE (cas 12173-60-3) clay samples for the development of ceramics08/03/2019
- Modification of ILLITE (cas 12173-60-3) with calcium pimelate and its influence on the crystallization and mechanical property of isotactic polypropylene08/01/2019
- Preparation and properties of TiO2/ILLITE (cas 12173-60-3) composites synthesized at different hydrothermal pH values07/31/2019


