Cr3+ doped nanoporous anodic alumina: Facile microwave assisted doping to realize nanoporous ruby and phase dependent photoluminescence
-
Add time:08/04/2019 Source:sciencedirect.com
Microwave-assisted solution technique (MAST) was used for the homogeneous doping of Cr3+ in nanoporous anodic alumina (NAA) which when heat-treated transforms into nanoporous ruby. The rise in annealing temperature led to the phase transition in the sequence: amorphous- δ- θ- α-alumina as evidenced by XRD. The dopant was homogenously distributed as seen from the elemental mapping and the Cr3+ content was 0.5 at%. Diffuse reflectance spectroscopy (DRS) displayed the characteristic blue and green absorption bands and the color-tone varied from light-green at 700 °C to the pink appearance at 1350 °C owing to the dopant diffusion. Two broad photoluminescence (PL) excitation bands centered at ∼550 nm and ∼400 nm were observed whose intensity increased with the annealing temperature. All the alumina phases exhibited characteristic phase dependent PL showing variation in the luminescence intensity and peak position. The characteristic R-line for α-phase was intense and observed at 694 nm with 4 m s lifetime in accordance with that expected for Ruby. Crystal field parameters were obtained from the PL excitation spectra and Dq/B values were found to be higher than 2.3 for all the phases of NAA confirming the presence of Cr3+ ions in the strong crystal field. With annealing, the CIE coordinates moved towards the red region. The presented work shows a promising easy and inexpensive method for dopant incorporation into alumina and explores the understanding of phase-dependent emission of Cr3+ doped NAA for their potential applications in the areas of nano-optics and composite luminescent nanomaterials.
We also recommend Trading Suppliers and Manufacturers of RUBY POWDER (cas 12174-49-1). Pls Click Website Link as below: cas 12174-49-1 suppliers
Prev:Effect of fusion mixture treatment on the surface of low grade natural ruby
Next:Ion beam analysis of rubies and their simulants) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Surface and bulk 3D analysis of natural and processed ruby using electron probe micro analyzer and X-ray micro CT scan08/09/2019
- Luminescence and EPR properties of high quality ruby crystals prepared by the optical floating zone method08/08/2019
- Aesthetic value improvement of the ruby stone using heat treatment and its synergetic surface study08/07/2019
- Fracto-mechanoluminescence from ruby and Cr doped spinel in cutting, grinding and polishing processes08/06/2019
- Ion beam analysis of rubies and their simulants08/05/2019
- Effect of fusion mixture treatment on the surface of low grade natural ruby08/03/2019
- Fluorescent cooling of objects exposed to sunlight – The ruby example08/02/2019
- Cytotoxic glycosides from the roots of Weigela x “Bristol Ruby”08/01/2019
- Fabrication of ruby by flame fusion technique and their properties07/31/2019


