Zinc niobate derived from mechanochemically activated oxides
-
Add time:07/31/2019 Source:sciencedirect.com
ZnO and Nb2O5 mixtures partially reacted to form ZnNb2O6 during a high-energy ball milling process after milling for 5–15 h. The milled powders were extremely active and almost single phase ZnNb2O6 could be achieved at a temperature as low as 500 °C. The effect of post-annealing on the grain growth and microstructure of the milled powders was investigated and discussed. Fully dense ZnNb2O6 ceramics with an average grain size of 5, 3.5 and 2.4 μm can be obtained at 1100 °C from the powders milled for 5, 10 and 15 h, respectively.
We also recommend Trading Suppliers and Manufacturers of ZINC NIOBATE 97 (cas 12201-66-0). Pls Click Website Link as below: cas 12201-66-0 suppliers
Prev:Investigation on the influence of SODIUM ZIRCONATE (cas 12201-48-8) nanoparticles on the structural characteristics and electrical properties of polyvinyl alcohol nanocomposite films
Next:Sintering behavior and microwave dielectric properties of nano zinc niobate powder) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Self-cleaning and spectral attributes of erbium doped sodium-zinc-tellurite glass: Role of titania nanoparticles08/06/2019
- Synthesis, structural and DFT studies of a peroxo-niobate complex of the biological ligand 2-quinaldic acid08/05/2019
- Preparation and structural investigations of the mixed bismuth niobates, containing transition metals08/04/2019
- Lead zinc niobate (PZN)–barium titanate (BT) ceramics from mechanochemically synthesized powders08/03/2019
- Synthesis and dielectric properties of lead magnesium niobate a review08/02/2019
- Sintering behavior and microwave dielectric properties of nano zinc niobate powder08/01/2019
-
Health and Chemical more >