Dosimetric and optical properties of CaSO4:Tm and CaSO4:Tm,Ag crystals produced by a slow evaporation route

Add time:08/03/2019    Source:sciencedirect.com

The motivation of this work was to produce TL dosimeters based on crystals of CaSO4 doped with thulium and silver, by means of a suitable new route. The crystals were produced by an adaptation of the slow evaporation route using calcium carbonate (CaCO3) as precursor, and incorporating the dopants (Tm2O3 and silver nanoparticles) in a solution of sulfuric acid, which is evaporated resulting in CaSO4:Tm or CaSO4:Tm,Ag crystal powders. X-ray diffraction analyses showed that the produced samples exhibit only a single phase corresponding to the crystal structure of anhydrite. Optical characterization was performed to determine the band gap of the materials. Samples did not show a reasonable OSL signal after stimulation with blue LEDs. TL characteristics such as glow curves, linearity and reproducibility of response, minimum detectable dose and fading were evaluated. The CaSO4:Tm samples showed TL emission glow curves with peaks in temperatures proper for dosimetry. The CaSO4:Tm,Ag samples presented a very intense peak displaced to high temperatures that could only be observed by applying heating rates below 4 °C/s. Samples doped with thulium oxide and silver nanoparticles showed the highest TL intensity and lowest fading.

We also recommend Trading Suppliers and Manufacturers of (-)-DIP-BROMIDE(TM) (cas 104114-70-7). Pls Click Website Link as below: cas 104114-70-7 suppliers

Prev:Tuning the photocatalytic activity of ZnO by TM (TM = Fe, Co, Ni) doping
Next:Rigor and relevance in empirical TM research: Key issues and challenges)