Development of metal organic framework-199 immobilized zeolite foam for adsorption of common indoor VOCs
-
Add time:08/03/2019 Source:sciencedirect.com
Reticulated foam shaped adsorbents are more efficient for the removal of volatile organic compounds (VOCs), particularly from low VOC-concentration indoor air streams. In this study composite structure of zeolite and metal organic frameworks (MOFs), referred as ZMF, has been fabricated by immobilization of fine MOF-199 powder on foam shaped Zeolite Socony Mobil-5 (ZSM-5) Zeolitic structure, referred as ZF. The ZMF possess a uniform and well-dispersed coating of MOF-199 on the porous framework of ZF. It shows higher surface area, pore volume, and VOCs adsorption capacity, as compared to ZF-structure. Post-fabrication changes in selective adsorption properties of ZMF were studied with three common indoor VOCs (benzene, n-hexane, and cyclohexane), using gravimetric adsorption technique. The adsorption capacity of ZMF with different VOCs follow the order of benzene > n-hexane > cyclohexane. In comparison with MOF-199 and ZF, the composite structure ZMF shows improvement in selectivity for benzene from other two VOCs. Further, improvement in efficiency and stability of prepared ZMF was found to be associated with its high MOF loading capacity and unique morphological and structural properties. The developed composite structure with improved VOCs removal and recyclability could be a promising material for small to limited scale air pollution treatment units.
We also recommend Trading Suppliers and Manufacturers of C.I. Acid Blue 199 (cas 12219-28-2). Pls Click Website Link as below: cas 12219-28-2 suppliers
Prev:Degradation of dyehouse effluent containing C.I. Direct Blue 199 by processes of ozonation, UV/H2O2 and in sequence of ozonation with UV/H2O2
Next:Influence of acid dyes on the photo-oxidation of nylon 6,6 film: relationship with rate of photofading and luminescent species) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Decolorization of Blue CL-BR dye by AOPs using bleach wastewater as source of H2O208/07/2019
- Photooxidation and stabilisation of mixed acid dyed nylon 6,6 film and fibres: influence of thermal history, delustrant and relationship with luminescent species08/06/2019
- Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent08/05/2019
- Influence of acid dyes on the photo-oxidation of nylon 6,6 film: relationship with rate of photofading and luminescent species08/04/2019
- Degradation of dyehouse effluent containing C.I. Direct Blue 199 by processes of ozonation, UV/H2O2 and in sequence of ozonation with UV/H2O208/02/2019
- Decolorization and mineralization of a phthalocyanine dye C.I. Direct Blue 199 using UV/H2O2 process08/01/2019
-
Health and Chemical more >


