A rapid and sensitive method for the determination of inorganic chloride in oil samples

Add time:08/03/2019    Source:sciencedirect.com

A novel isotope dilution method for the analysis of inorganic chloride in fuel oil matrix is presented. The samples were diluted by isopropyl alcohol:toluene, mixed with 37Cl− internal standard and reacted with triethyloxonium tetrafluoroborate at room temperature. This reagent promoted conversion of Cl− into stable ethyl chloride (EtCl) which was selectively detected by headspace GC–MS/MS with no matrix effects. A limit of detection of 0.2 mg kg−1 Cl− was obtained in fuel oil. The method was tested on the NIST SRM 1634c (trace elements in residual fuel oil) and validated through a series of robustness tests. Over 18 days, the variation in the signal response was less than 10% and the RSD for quantitative isotope dilution results was below 3%. Overall, the method is fast, simple and allows robust quantitation of inorganic chloride directly in the non-aqueous media.

We also recommend Trading Suppliers and Manufacturers of CHLORIDE STANDARD (cas 16887-00-6). Pls Click Website Link as below: cas 16887-00-6 suppliers

Prev:Standard and sample preparation for the micro XRF quantification of chlorides in hardened cement pastes
Next:Effect of electrochemical chloride removal and ground granulated blast furnace slag on the chloride binding of cement paste subjected to NaCl and Na2SO4 attack)