Engineered architectures of gadolinium zirconate based thermal barrier coatings subjected to hot corrosion test

Add time:08/05/2019    Source:sciencedirect.com

Gadolinium zirconate (GZ) is considered as a promising top coat candidate for high temperature TBC applications. Suspension plasma spray has shown the capability to generate a wide range of microstructures including the desirable columnar microstructure. In this study, two different TBC architectures were deposited using the axial suspension plasma spray. The first variation was a triple layered TBC comprising of thin YSZ base layer beneath a relatively porous GZ intermediate layer and a dense GZ top layer. The second variation was a composite TBC architecture of GZ and YSZ comprising of thin YSZ base layer and GZ + YSZ top layer. Cross sectional SEM analysis of the layered and composite TBCs revealed a columnar microstructure. The porosity content of the deposited TBCs was measured using two methods (Image Analysis and Water Intrusion). The as-sprayed TBCs were exposed at 900 °C for 8 h to a corrosive salt environment consisting of a mixture of vanadium pentoxide and sodium sulfate. XRD analysis on the as-corroded TBCs top surface showed the presence of gadolinium vanadate in both the layered and the composite TBCs. SEM/EDS analysis of the top surface and the cross-section of the layered and composite TBCs after hot corrosion test revealed the infiltration of the molten salts through the columnar gaps. The composite TBC showed a lower hot corrosion induced damage compared to the layered TBC where a considerable spallation was observed.

We also recommend Trading Suppliers and Manufacturers of GADOLINIUM(III) SULFATE (cas 13450-87-8). Pls Click Website Link as below: cas 13450-87-8 suppliers

Prev:Experimental and theoretical studies of acetatodi(methylcyano)bis(O,O′-dialkyl and alkylene dithiophosphate)gadolinium(III) novel adducts
Next:Selection of solvent extraction reagent for the separation of europium(III) and gadolinium(III))