Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with Acetoacetanilide (cas 102-01-2)

Add time:08/10/2019    Source:sciencedirect.com

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10−7 M, and the limit of detection (LOD) of 3 × 10−9 M (0.09 ppb) is achievable. The sample throughput is 15 h−1. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.

We also recommend Trading Suppliers and Manufacturers of Acetoacetanilide (cas 102-01-2). Pls Click Website Link as below: cas 102-01-2 suppliers

Prev:Some studies on the growth and characterization of organic nonlinear optical Acetoacetanilide (cas 102-01-2) single crystals
Next:Effect of swift heavy ion (SHI) irradiation on dielectric properties of Acetoacetanilide (cas 102-01-2) crystals)