A novel all-solid-state ammonium electrode with polyaniline and copolymer of aniline/2,5-Dimethoxyaniline (cas 102-56-7) as transducers
-
Add time:08/07/2019 Source:sciencedirect.com
From the centre outwards, the novel all-solid-state ammonium ion-selective electrode was composed of a silver wire as substrate, covered with conductive polyaniline (PANI), copolymer of aniline/2,5-dimethoxyaniline (CPANI) and ion selective membrane (ISM) layers. PANI was formed in-situ on the Ag wire by the cyclic voltammetry method, scanned from 0 to 0.45 V in 0.1 M aniline hydrochloride solution, and then dipped the electrode in the N,N-Dimethyl formamide (DMF) solution of CPANI and ISM sequentially. The scanning electron microscope (SEM) observation revealed that the PANI formed cross-linked slabs about 0.3–2.5 μm in length and 0.3–0.6 μm in thickness. Under the SEM, CPANI micro particles filled in the cross-linked PANI slabs. Bulk impedance of the transducer was between 100 and 200 Ω, much lower than the poly (vinyl chloride) (PVC) based transducer in the previous work. Fabrication procedures, micro-structure, and the common resolvability of the CPANI and ISM in the DMF were all essential for reducing the cross-boundary resistance. Linear response range of the electrode was 10−4–10−1 M, with a Nernst slope of 54.20–56.59 mV/decade. The potential drifts of each decade were ±0.5 mV within 400 s. The response time was less than 1 s and the lifetime was three months. The ammonium electrodes were used to test the ammonium in the waste water with pH value from 2.6 to 10.1, and the testing results were in agreement with those obtained by titration method and Nessler’s reagent colorimetry method. The ammonium electrode proposed in this paper is suitable for in-situ monitoring NH4+ content in the environment in a wide range of pH value.
We also recommend Trading Suppliers and Manufacturers of 2,5-Dimethoxyaniline (cas 102-56-7). Pls Click Website Link as below: cas 102-56-7 suppliers
Prev:Humidity sensitive poly(2,5-Dimethoxyaniline (cas 102-56-7))/WO3 composites
Next:Poly(2,5-Dimethoxyaniline (cas 102-56-7)-co-2,5-diaminobenzenesulfonic acid) with cross-linking structure for platinum deposits in methanol oxidation) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Influence of anions on formation and electroacitivity of poly-2,5-Dimethoxyaniline (cas 102-56-7)08/12/2019
- The methanol adsorption behavior on platinum/poly(2,5-Dimethoxyaniline (cas 102-56-7)) composites for application in methanol sensing08/11/2019
- Growth of poly(2,5-Dimethoxyaniline (cas 102-56-7)) coatings on low carbon steel08/10/2019
- Poly(2,5-Dimethoxyaniline (cas 102-56-7)) based electrochromic device08/09/2019
- Poly(2,5-Dimethoxyaniline (cas 102-56-7)-co-2,5-diaminobenzenesulfonic acid) with cross-linking structure for platinum deposits in methanol oxidation08/08/2019
- Humidity sensitive poly(2,5-Dimethoxyaniline (cas 102-56-7))/WO3 composites08/06/2019
- Formation of poly-2,5-Dimethoxyaniline (cas 102-56-7) on steels08/05/2019
- HRP-dendron nanoparticles: The efficient biocatalyst for enzymatic polymerization of poly(2,5-Dimethoxyaniline (cas 102-56-7))08/04/2019
- Measurement and correlation of solubility of 4-chloro-2,5-dimethoxynitrobenzene and 4-chloro-2,5-Dimethoxyaniline (cas 102-56-7) in methanol, ethanol, xylene and toluene08/03/2019
-
Health and Chemical more >
-
Related Products


