permanganic acid (cas 13465-41-3): A novel precursor for the preparation of managanese oxide catalysts
-
Add time:08/07/2019 Source:sciencedirect.com
Unsupported and ψ-alumina supported MnOx catalysts (1–10 wt-% Mn) were preparedfrom aqueous solutions of HMnO4 and compared with nitrate based samples. They were characterized by XRD, XPS, BET area, oxygen storage capacity and by their catalytic behaviour versus ammonia DeNOx reaction. The unsupported oxide is amorphous at 300°C with a high surface area (45 m2.g−1) and transforms to α-Mn2O3 below 600°C. The supported samples show high dispersion which correlates well with high catalytic activity and the absence of detectable crystalline phase. The difference between HMnO4 and manganese nitrate precursors vanishes after calcination at 1000°C, with the formation of Mn3O4 and the transformation of the carrier into α-alumina; the DeNOx activity remains high but the selectivity towards N2 decreases as the temperature increases.
We also recommend Trading Suppliers and Manufacturers of permanganic acid (cas 13465-41-3). Pls Click Website Link as below: cas 13465-41-3 suppliers
Prev:Modelling and simulation of the permanganic etching of banded spherulitic polyethylene: correlation with AFM observations
Next:The isolation of radio-manganese by distillation as permanganic acid (cas 13465-41-3)) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Electron microscopic studies on planar texture and disclination of cholesteric mesophases in acyloyl chitosan/acrylic acid composite films08/14/2019
- A note on the distillation of permanganic acid (cas 13465-41-3) from sulphuric acid solutions08/13/2019
- The reduction mechanism of permanganic ion in mineral acid media08/12/2019
- On quantitative permanganic etching08/11/2019
- Permanganic etching of PEEK08/10/2019
- An improved permanganic etchant for polyolefines08/09/2019
- The isolation of radio-manganese by distillation as permanganic acid (cas 13465-41-3)08/08/2019
- Modelling and simulation of the permanganic etching of banded spherulitic polyethylene: correlation with AFM observations08/06/2019
- Corrosion of cupronickel alloy in permanganate under acidic condition08/05/2019
-
Health and Chemical more >


