Trivalent europium-doped STRONTIUM MOLYBDATE (cas 13470-04-7) red phosphors in white light-emitting diodes: Synthesis, photophysical properties and theoretical calculations
-
Add time:08/12/2019 Source:sciencedirect.com
Eu3+-doped STRONTIUM MOLYBDATE (cas 13470-04-7) red phosphors (Sr1−xMoO4:Eux (x = 0.01–0.2)) for white light-emitting diodes (LED) were synthesized by the solid-state reaction method. The fluorescent intensities of the as-prepared phosphors were remarkably improved. The excitation and emission spectra demonstrate that these phosphors can be effectively excited by the near-UV light (395 nm) and blue light (466 nm). Their emitted red light peaks are located at 613 nm, and the highest quantum yield value (η) of the as-grown red phosphor, which is 95.85%, is much higher than that of commercial red phosphor (77.53%). These red phosphors plus commercial yellow powers (1:10) were successfully packaged with the GaN-based blue chips on a piranha frame by epoxy resins. The encapsulated white LED lamps show high performance of the CIE chromaticity coordinates and color temperatures. Moreover, to explain the fluorescent spectra of these phosphors, a complete 3003 × 3003 energy matrix was successfully built by an effective operator Hamiltonian including free ion and crystal field interactions. For the first time, the fluorescent spectra for Eu3+ ion at the tetragonal (S4) Sr2+ site of SrMoO4 crystal were calculated from a complete diagonalization (of energy matrix) method. The fitting values are close to the experimental results.
We also recommend Trading Suppliers and Manufacturers of STRONTIUM MOLYBDATE (cas 13470-04-7). Pls Click Website Link as below: cas 13470-04-7 suppliers
Prev:Optimization of STRONTIUM MOLYBDATE (cas 13470-04-7) based composite anode for solid oxide fuel cells
Next:Synthesis and Properties of Eu3+ Activated STRONTIUM MOLYBDATE (cas 13470-04-7) Phosphor) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Recovery of molybdates from an alkaline leachate of spent hydrodesulphurisation catalyst – proposal of a nearly-closed process08/14/2019
- Synthesis and Properties of Eu3+ Activated STRONTIUM MOLYBDATE (cas 13470-04-7) Phosphor08/13/2019
- Optimization of STRONTIUM MOLYBDATE (cas 13470-04-7) based composite anode for solid oxide fuel cells08/11/2019
- Thermal and electrical properties of perovskite-type STRONTIUM MOLYBDATE (cas 13470-04-7)08/10/2019
- Magnetic and transport properties of perovskite-related STRONTIUM MOLYBDATE (cas 13470-04-7)s08/09/2019
- Visible and near-infrared luminescent properties of Pr3+ doped STRONTIUM MOLYBDATE (cas 13470-04-7) thin films by a facile polymer-assisted deposition process08/08/2019
- Effect of precipitation conditions on the morphology of STRONTIUM MOLYBDATE (cas 13470-04-7) agglomerates08/07/2019
- Assessment of divergent functional properties of seed-like STRONTIUM MOLYBDATE (cas 13470-04-7) for the photocatalysis and electrocatalysis of the postharvest scald inhibitor diphenylamine08/06/2019
- Experimental planning of the synthesis of STRONTIUM MOLYBDATE (cas 13470-04-7) by EDTA-citrate and its structural influence, morphology and optical bandgap08/05/2019
-
Health and Chemical more >


