Polymer derived ceramic materials from Si, B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection
-
Add time:08/09/2019 Source:sciencedirect.com
Silica-based coating systems were developed using polymer derived ceramics (PDCs) technology. Ceramic composites on the base of a SiO2 and SiNO matrix and homogeneously distributed Mo5SiB2, SiB6, Si and B fillers were manufactured. The coating systems have low porosity and provide a high oxidation resistance up to 100 h at 800 °C and 1100 °C in air. The influence of temperature and atmosphere of pyrolysis on the polymer precursor, the volume fraction of filler materials on the chemical composition of compacts as well as their high-temperature oxidation protection was investigated.
We also recommend Trading Suppliers and Manufacturers of BORON-10B OXIDE (cas 12228-57-8). Pls Click Website Link as below: cas 12228-57-8 suppliers
Prev:Effect of boron addition on microstructure, mechanical properties and oxidation resistance of TaC ceramics
Next:Oxidation response of three Nb–Cr–Mo–Si–B alloys in air) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Isothermal and cyclic oxidation behaviours of MoSi2 with additions of B at 1250 °C prepared by spark plasma sintering08/14/2019
- Nitric oxide protects carbon assimilation process of watermelon from boron-induced oxidative injury08/13/2019
- Oxidation behavior of magnetron sputtered double layer coatings containing molybdenum, silicon and boron08/12/2019
- Oxidative protection of carbon fibers with carborane-containing polymer08/11/2019
- Oxidation response of three Nb–Cr–Mo–Si–B alloys in air08/10/2019
- Effect of boron addition on microstructure, mechanical properties and oxidation resistance of TaC ceramics08/08/2019
- Processing of enriched elemental boron (10B ∼ 65 at. %)08/07/2019
- High-temperature oxidation resistance of dense amorphous boron-rich SiBCN monoliths08/06/2019
