Setting process of lime-based conservation mortars with barium hydroxide

Add time:08/09/2019    Source:sciencedirect.com

This paper presents the effect of barium hydroxide on the setting mechanism of lime-based conservation mortars, when used as an additive material. The study focuses on the monitoring of the setting process and the identification of the mineral phases formed, which are essential for furthering the study of the durability of barium mixtures against chemical degradation. X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and thermal analysis (DTA–TG) were used to monitor the setting processes of these mixtures and identify new phases formed. The results suggest that barium hydroxide is evenly distributed within the lime and produces a homogeneous binding material, consisting of calcite (CaCO3), witherite (BaCO3) and barium–calcium carbonate [BaCa(CO3)2]. Finally, it was found that barium carbonate can be directly bonded to calcitic aggregates and therefore increases its chemical compatibility with the binding material.

We also recommend Trading Suppliers and Manufacturers of Barium hydroxide octahydrate (cas 12230-71-6). Pls Click Website Link as below: cas 12230-71-6 suppliers

Prev:Experimental Investigation of Improved Thermal Characteristics of Al2O3/Barium Hydroxide Octa Hydrate as Phase Change Materials (PCMs)
Next:Green synthesis and characterization of 8-hydroxyquinoline barium (BaQ2))