Separation of maleic anhydride grafted polypropylene using multidimensional high-temperature liquid chromatography
-
Add time:08/09/2019 Source:sciencedirect.com
Functionalization addresses a property gap of polyolefins and opens new perspectives due to improved surface properties in applications like composites (e.g., glass fiber reinforced polypropylene) and anti-corrosive coatings for metals. Various techniques have been developed to characterize functionalized polyolefins, yet no analytical approach addressing their chemical heterogeneity exists. Using High Temperature Size Exclusion Chromatography (HT-SEC) coupled to infrared spectroscopy we could show for two model samples of polypropylene grafted maleic anhydride (PP-g-MA), differing in their nominal MA content, that the grafting density increases with decreasing molar mass. Crystallization Analysis Fractionation (CRYSTAF) does not enable to separate these samples according to their composition to the extent required. Yet, when using High Temperature High Performance Liquid Chromatography (HT-HPLC), with either silica gel or Mica as stationary phase and a gradient mobile phase, a deformulation into a grafted and a non-grafted fraction could be achieved. This was confirmed by analyzing the eluted fractions by infrared spectroscopy. Hyphenating the separation according to composition with a separation according to molar mass (HT-HPLC x HT-SEC) enabled for the first time to reveal the bivariate distribution of PP-g-MA with regard to the molar mass and composition. Using on-line infrared detection quantitative information on the compositional and molar mass parameters of the individual fractions could be obtained.
We also recommend Trading Suppliers and Manufacturers of POLYPROPYLENE-GRAFT-MALEIC ANHYDRIDE (cas 107001-49-0). Pls Click Website Link as below: cas 107001-49-0 suppliers
Prev:Mechanical and dielectric properties of graphene incorporated polypropylene nanocomposites using POLYPROPYLENE-GRAFT-MALEIC ANHYDRIDE (cas 107001-49-0) as a compatibilizer
Next:POLYPROPYLENE-GRAFT-MALEIC ANHYDRIDE (cas 107001-49-0)–nanocomposites: II – fire behaviour of nanocomposites produced under nitrogen and in air) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Electrical and mechanical properties of graphite/maleic anhydride grafted polypropylene nanocomposites08/16/2019
- Post-yield crack toughness behavior of polyamide-6/polypropylene grafted maleic anhydride/nanoclay ternary nanocomposites08/15/2019
- Synergetic effect of epoxy resin and maleic anhydride grafted polypropylene on improving mechanical properties of polypropylene/short carbon fiber composites08/14/2019
- Tailoring the morphology of polypropylene/polyamide 66 blend at an asymmetric composition by using organoclay and maleic anhydride grafted polypropylene08/13/2019
- Polypropylene–graft–maleic anhydride-nanocomposites: I—Characterization and thermal stability of nanocomposites produced under nitrogen and in air08/12/2019
- Fabrication of functionalized graphene oxide/maleic anhydride grafted polypropylene composite film with excellent gas barrier and anticorrosion properties08/11/2019
- POLYPROPYLENE-GRAFT-MALEIC ANHYDRIDE (cas 107001-49-0)–nanocomposites: II – fire behaviour of nanocomposites produced under nitrogen and in air08/10/2019
- Mechanical and dielectric properties of graphene incorporated polypropylene nanocomposites using POLYPROPYLENE-GRAFT-MALEIC ANHYDRIDE (cas 107001-49-0) as a compatibilizer08/08/2019
- Effect of surface modified kaolin on properties of polypropylene grafted maleic anhydride08/07/2019


