Adsorption of C.I. Reactive Red 228 dye from aqueous solution by modified cellulose from flax shive: Kinetics, equilibrium, and thermodynamics

Add time:08/08/2019    Source:sciencedirect.com

Cellulose from flax shive was modified with quaternary ammonium groups to facilitate removal of C.I. Reactive Red 228 (RR228) dye from aqueous media. The adsorption of RR228 was investigated at various temperatures, adsorbent doses, initial dye concentrations and pH values. Two kinetic models were used to describe the adsorption process. Two isotherm models were applied to evaluate the adsorption equilibrium, and its thermodynamic parameters were calculated. The maximum capacity of the modified flax shive cellulose for adsorption of RR228 was 190 mg g−1 at pH 3 under dose of 0.4 g L−1 and initial concentration of 80 mg L−1. The adsorption process and equilibrium of RR228 were well fitted by a pseudo-second-order kinetic model and Langmuir model, respectively. Thermodynamic evaluation indicated that the adsorption is exothermic, spontaneous, and favorable.

We also recommend Trading Suppliers and Manufacturers of C.I. Acid Red 228 (cas 12270-01-8). Pls Click Website Link as below: cas 12270-01-8 suppliers

Prev:Biosynthesis of high yield fatty acids from Chlorella vulgaris NIES-227 under nitrogen starvation stress during heterotrophic cultivation
Next:Improved pretreatment of yellow poplar biomass using hot compressed water and enzymatically-generated peracetic acid)