Formation of aluminum phosphate coating on graphite by cathodic electrochemical treatment

Add time:08/11/2019    Source:sciencedirect.com

Electrochemical treatment is a new method for accelerating the phosphating processes at low temperatures that can be performed as cathodic and anodic treatments. In this study, aluminum phosphate coating was deposited on graphite by cathodic electrochemical treatment, and, then heat treatment was performed on it. Microstructure, chemical composition, phase structure and adhesion of the coating produced in current densities of 35, 45, and, 55 mA/cm2, temperatures of 55, 70, and, 85 °C, and, treatment types of a three-layer coating at 120 min and a single-layer coating at 360 min were characterized using a scanning electron microscope, energy dispersive X-ray analysis, X-ray diffraction, and, scribe-grid test. The results revealed that the three-layer aluminum electrophosphate coating deposited in the current density of 35 mA/cm2, temperature of 70 °C, and, treatment time of 120 min was favorable due to a dense microstructure, suitable thickness, and, good adhesion. Furthermore, the phase that was formed in this coating was characterized as Al(PO3)3.

We also recommend Trading Suppliers and Manufacturers of ALUMINIUM HYDROGEN PHOSPHATE (cas 13530-54-6). Pls Click Website Link as below: cas 13530-54-6 suppliers

Prev:Effective adsorption of trace phosphate and aluminum in realistic water by carbon nanotubes and reduced graphene oxides
Next:Electrochemical removal of phosphate from synthetic effluent: A comparative study between iron and aluminum by using experimental design methodology)