Preparation and characterization of foamed microporous mullite ceramics based on kyanite (cas 1302-76-7)

Add time:08/16/2019    Source:sciencedirect.com

A new approach has been developed for preparing microporous mullite ceramics based on kyanite obtained by foaming with aluminate cement as the gel-former. By using this method, foams in slurries are effectively stabilized, microporous mullite ceramics with high open porosity (53–77.3%), high compressive strength (5.5–50.5 MPa), small mean pore size (2.5–9.1 μm) and low thermal conductivity (0.37–0.45 W/mK at 1100 °C) are prepared. Effects of foaming agent addition on the microstructures and properties of samples are investigated. With increasing foaming agent addition, the number and size of pores increase firstly and then tend to be constant. The pore structure looks like a bird׳s nest, in which there are a lot of needle-like mullites, which results in the effective pore size smaller.

We also recommend Trading Suppliers and Manufacturers of kyanite (cas 1302-76-7). Pls Click Website Link as below: cas 1302-76-7 suppliers

Prev:Thermal equation of state of a natural kyanite (cas 1302-76-7) up to 8.55 GPa and 1273 K
Next:Laser-induced time-resolved luminescence of orange kyanite (cas 1302-76-7) Al2SiO5)