Mechano-chemical oxidation of arsenopyrite (cas 1303-18-0)

Add time:08/11/2019    Source:sciencedirect.com

This paper presents the results from the investigation of arsenopyrite oxidation via mechano-chemical activation, using a stirred mill. Water and hydrogen peroxide were chosen as the lixiviant and oxidant, respectively, and maintained at a relatively low temperature (50 °C). The milling media size, mill speed, slurry percent solids and amount of H2O2 added were all kept constant throughoust these experiments. The only operational variable for this investigation was the milling time, which results in increasing levels of specific energy provided by the mill. The products of activated arsenopyrite are characterised in terms of phase composition, particulate and structural characteristics, along with reactivity.Mechano-chemical activation of arsenopyrite under oxidizing conditions shows a maximum dissolution of around 9 wt% for iron and 7 wt% for arsenic after 2 h of milling. After 3 h of milling, the main phase present is found to be amorphous in nature.

We also recommend Trading Suppliers and Manufacturers of arsenopyrite (cas 1303-18-0). Pls Click Website Link as below: cas 1303-18-0 suppliers

Prev:Depression mechanism involving Fe3+ during arsenopyrite (cas 1303-18-0) flotation
Next:Chemical oxidation of arsenopyrite (cas 1303-18-0) using a novel oxidant—Chlorine dioxide)