Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff's bases

Add time:08/12/2019    Source:sciencedirect.com

Praseodymium ion selective polyvinyl chloride (PVC) membrane sensors, based on two new Schiff's bases 1,3-diphenylpropane-1,3-diylidenebis(azan-1-ylidene)diphenol (M1) and N,N′-bis(pyridoxylideneiminato) ethylene (M2) have been developed and studied. The sensor having membrane composition of PVC: o-NPOE: ionophore (M1): NaTPB (w/w; mg) of 150: 300: 8: 5 showed best performances in comparison to M2 based membranes. The sensor based on (M1) exhibits the working concentration range 1.0 × 10−8 to 1.0 × 10−2 M with a detection limit of 5.0 × 10−9 M and a Nernstian slope 20.0 ± 0.3 mV decade−1 of activity. It exhibited a quick response time as <8 s and its potential responses were pH independent across the range of 3.5–8.5.The influence of the membrane composition and possible interfering ions have also been investigated on the response properties of the electrode. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for praseodymium(III) ions over wide variety of other cations. To asses its analytical applicability the prepared sensor was successfully applied for determination of praseodymium(III) in spiked water samples.

We also recommend Trading Suppliers and Manufacturers of PRASEODYMIUM BROMIDE (cas 13536-53-3). Pls Click Website Link as below: cas 13536-53-3 suppliers

Prev:Optical absorption and emission spectroscopy of the ternary PRASEODYMIUM BROMIDE (cas 13536-53-3)s: K2PrBr5 and K2PrXLa1−XBr5 types
Next:Comparison of morphology and electrical conductivity of various thin films containing nano-crystalline praseodymium oxide particles)