Modification of properties of poly(butylene succinate) by copolymerization with tartaric acid-based monomers

Add time:07/21/2019    Source:sciencedirect.com

The two cyclic acetals, 2,3-di-O-methylene-l-threitol and dimethyl 2,3-di-O-methylene-l-threarate, were used for the synthesis of two series of PBS copolyesters differing in which unit, butylene or succinate, was replaced, in addition of the corresponding parent homopolyesters. Polycondensation reactions were carried out in the melt affording polymers with satisfactory molecular weights. Copolyesters were prepared with contents in tartaric acid-based units over the whole range of compositions and they all had a random chemical microstructure. The physical properties of the novel copolyesters varied widely depending not only on their composition but also on the type of unit that was replaced. They showed higher glass transition (Tg), lower melting temperatures (Tm), and lower crystallinity compared to the parent PBS homopolyester. Regarding mechanical properties, the presence of the stiff cyclic acetal units in the PBS chain caused an increase in the elongation at break and also a reduction in both elastic modulus and tensile strength of the polyester. Upon copolymerization the PBS notably increased its hydrolytic degradability and more slightly its susceptibility to be degraded by lipases.

We also recommend Trading Suppliers and Manufacturers of Dibutyl succinate (cas 141-03-7). Pls Click Website Link as below: cas 141-03-7 suppliers

Prev:Comparison of adipate and succinate polyesters in thermoplastic polyurethanes
Next:Liquid–liquid equilibria of (water + butyric acid + diethyl succinate or diethyl glutarate or diethyl adipate) ternary systems)