Crystallization kinetics, sintering, microstructure, and properties of low temperature co-fired magnesium aluminum silicate glass-ceramic
-
Add time:08/16/2019 Source:sciencedirect.com
We investigated the effects of sintering temperature and time on the dielectric and mechanical properties, sintering, microstructure, crystallization, and thermal expansion coefficient of Magnesium aluminum silicate glass-ceramic for the applications of low temperature co-fired ceramics substrates. The glass-ceramic has been prepared by melt quenching route. The crystallization kinetics of glass-ceramic was investigated using non-isothermal methods by differential thermal analysis. The activation energy for crystallization E was found to be 201.92 kJ/mol. Mg0.6Al1.2Si1.8O6 was the first crystalline phase forming in the glass-ceramic. With the increase of sintering temperature, the phases of ZrO2 and indialite precipitate successively. The coefficient of thermal expansion of glass-ceramic increased with the increase of the sintering temperature and time. With the increase of sintering temperature or holding time, the density, bending strength and dielectric constant of the material all increased first and then decreased. The samples sintered at 900 °C for 2 h showed the best properties: high bulk density (2.695 g/cm3), low dielectric constant (6.21) and low dielectric loss (1.2 ∗ 10−3), good bending strength (163 MPa) and low coefficient of thermal expansion (6.35 ∗ 10−6 K−1). The results showed that the prepared glass-ceramic can be considered as a potential candidate for the application of low temperature co-fired ceramic substrates.
We also recommend Trading Suppliers and Manufacturers of aluminium magnesium silicate(2:1:2) (cas 12511-31-8). Pls Click Website Link as below: cas 12511-31-8 suppliers
Prev:Highly flexible magnesium silicate nanofibrous membranes for effective removal of methylene blue from aqueous solution
Next:A novel sensor aluminum silicate modified carbon paste electrode for determination of anti-depressant dothiepin HCl in pharmaceutical formulation and biological fluids) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- The precipitation of “magnesium silicate” under geothermal stresses. Formation and characterization08/18/2019
- A novel sensor aluminum silicate modified carbon paste electrode for determination of anti-depressant dothiepin HCl in pharmaceutical formulation and biological fluids08/17/2019
- Highly flexible magnesium silicate nanofibrous membranes for effective removal of methylene blue from aqueous solution08/15/2019
- Preparation of hierarchical magnesium silicate with excellent adsorption capacity08/14/2019
- Particle agglomeration of chitosan–magnesium aluminum silicate nanocomposites for direct compression tablets08/13/2019
- Characterization of magnesium silicate hydrate (M-S-H)08/12/2019
- Transient and steady states of Gd2Zr2O7 and 2ZrO2∙Y2O3 (ss) interactions with calcium magnesium aluminium silicates08/11/2019
- Sodium caseinate-magnesium aluminum silicate nanocomposite films for modified-release tablets08/10/2019
-
Health and Chemical more >


