Removal of chloride ions from an industrial polyethylenimine flocculant shifting it into an adhesive promoter using the anion exchange resin Amberlite IRA-420
-
Add time:08/15/2019 Source:sciencedirect.com
Aqueous solutions of polyethylenimines (PEI) are usually used in the manufacture process of paper from pulps to improve the physical strength, and the ink and coatings fixation and to facilitate the printing. When PEI is used as a liquid cationic flocculant in water treatment it is supplied as a cheaper hydrochloride salt. The hydrochloride salt form is easier to handle and may be converted into the free amine form for adhesive purposes by some separation processes. Ion exchange is one of the easiest and cheapest ways to remove chlorides from different aqueous solutions.The strongly basic ion exchanger Amberlite IRA-420 has demonstrated that it can be used for chloride removal. The equilibrium isotherms of chloride ions in PEI–HCl at 20 and 40 °C, and NaCl and HCl at 30 °C in aqueous solution on Amberlite IRA-420 have been obtained. The presence of HPEI+ as coion exerts an important influence on the ion exchange equilibrium. This behavior can be explained by the competition between the protonated amine groups of PEI and the quaternary groups of the resin the chloride ions that tends to promote a slightly non-favorable equilibrium. In the same way, the kinetic studies indicated that the chloride ions are slowly removed in presence of polyethylenimine. Finally, the Nernst–Planck homogeneous model allowed obtaining the self-diffusion coefficients for both the chloride and hydroxide ions in the Amberlite IRA-420 and the values are in the same order of magnitude as those reported in the literature.
We also recommend Trading Suppliers and Manufacturers of AMBERLITE RESIN CHLORIDE FORM GEL TYPE (cas 100915-93-3). Pls Click Website Link as below: cas 100915-93-3 suppliers
Prev:Original articleAmberlite IRA-400 Cl resin catalyzed synthesis of secondary amines and transformation into N-((1H-indol-3-yl) (heteroaryl) methyl)-N-heteroaryl benzenamines and bis-indoles via multicomponent reaction
Next:Chromatographic separation of glucose, xylose and arabinose from lignocellulosic hydrolysates using cation exchange resin) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Original articleSeparation/preconcentration of trace Pb(II) and Cd(II) with 2-mercaptobenzothiazole impregnated Amberlite XAD-1180 resin and their determination by flame atomic absorption spectrometry08/19/2019
- Gel-type ion exchange resin stabilized Pd-Bi nanoparticles for the glycerol oxidation in liquid phase08/18/2019
- Resin oxidization phenomenon and its influence factor during chromium(VI) removal from wastewater using gel-type anion exchangers08/17/2019
- Chromatographic separation of glucose, xylose and arabinose from lignocellulosic hydrolysates using cation exchange resin08/16/2019
- Original articleAmberlite IRA-400 Cl resin catalyzed synthesis of secondary amines and transformation into N-((1H-indol-3-yl) (heteroaryl) methyl)-N-heteroaryl benzenamines and bis-indoles via multicomponent reaction08/14/2019
- Research paperCuO and Cu2(OH)3Cl loaded gel-type anion exchange hybrid polymers obtained via tetrachlorocuprate ionic form08/13/2019
- Synthesis of quaternary ammonium-functionalized silica gel through grafting of dimethyl dodecyl [3-(trimethoxysilyl)propyl]ammonium chloride for nitrate removal in batch and column studies08/12/2019
-
Health and Chemical more >


