Full Length ArticleModification of Amberlite XAD-2 resin for U(VI) adsorption from Egyptian crude phosphoric acid

Add time:08/12/2019    Source:sciencedirect.com

Adsorption of U(VI) from Egyptian crude phosphoric acid was studied using the modified Amberlite XAD-2 resin. Modification process was performed by soaking Amberlite XAD-2 resin in tri-butyl phosphate (TBP) and di-2-ethyl hexyl phosphoric acid (D2EHPA) for increasing its adsorption capacity via equilibrium batch technique. For this purpose, different effective parameters such as: a dose of adsorbent, contact time, temperature, phosphoric acid concentration, and initial uranium (VI) concentration were investigated. The maximum sorption capacity by the modified resin achieved 67 mg g−1 of U (VI). Sorption of U (VI) follows both the Langmuir and Freundlich adsorption isotherms. Not less than 93% of the U (VI) uptaken by the modified Amberlite XAD-2 resin was desorbed using 1 mol L−1 NaCl + 0.1 mol L−1 H2SO4.

We also recommend Trading Suppliers and Manufacturers of AMBERLITE RESIN (cas 100915-94-4). Pls Click Website Link as below: cas 100915-94-4 suppliers

Prev:Original articleSeparation/preconcentration of trace Pb(II) and Cd(II) with 2-mercaptobenzothiazole impregnated Amberlite XAD-1180 resin and their determination by flame atomic absorption spectrometry
Next:Boron removal from water with fractionized Amberlite IRA743 resin)