Simulation and characterization of polycrystalline mercuric iodide film detector based on coplanar grid electrode

Add time:08/20/2019    Source:sciencedirect.com

Polycrystalline mercuric iodide films are being developed as a new detector technology for X-ray imaging at room temperature. Polycrystalline mercuric iodide (HgI2) films have been grown on ITO-coated glass substrates using hot-wall physical vapor deposition (HWPVD) with the different source temperatures. The electrical properties of high quality polycrystalline HgI2 detector based on coplanar-grid electrode are investigated at room temperature. The HgI2 device of high quality polycrystalline films has low leakage current before X-ray radiation and stable capacity under low frequency. Different coplanar-grid electrode patterns are designed by varying the widths of grid and gap. The finite elements analysis is used to simulate the potential distribution of the coplanar-grid HgI2 device. The electrode design of pattern A (the width of grid is 150 μm and the width of gap is 500 μm) is the best. The electrical characteristic of coplanar-grid device using mask A verifies the feasible simulation of electrode design for pattern A.

We also recommend Trading Suppliers and Manufacturers of Mercury iodide (cas 15385-57-6). Pls Click Website Link as below: cas 15385-57-6 suppliers

Prev:Microwave assisted synthesis of doped carbon dots and their application as green and simple turn off–on fluorescent sensor for mercury (II) and iodide in environmental samples
Next:Defects in mercuric iodide: an APW investigation)