Influence of in situ phase formation on properties of Calcium zirconate (cas 12013-47-7) refractories

Add time:07/19/2019    Source:sciencedirect.com

This study investigates chemical, physical, mechanical, and thermomechanical properties of Calcium zirconate (cas 12013-47-7) (CaZrO3) refractories. The applied fused raw material contained some residual cubic zirconia, which impairs the corrosion resistance of CaZrO3 refractories. To adjust the stoichiometry, CaCO3 was added. Furthermore, stoichiometric amounts of CaCO3/monoclinic ZrO2 were added to promote an in situ pore formation without altering the phase composition. After firing cubic zirconia was only found in the coarse grained aggregates. CaCO3 additions increased the apparent porosity and reduced the thermal expansion coefficient due to the stoichiometric adjustment. Surprisingly, a higher porosity did not result in an improved thermal shock resistance, which can be attributed to a shift to larger pore sizes. This might cause a lower crack density, which is usually associated with a reduced thermal shock resistance. Future work will address the formation of smaller pores and the evaluation of the thermal shock resistance under practical conditions.

We also recommend Trading Suppliers and Manufacturers of Calcium zirconate (cas 12013-47-7). Pls Click Website Link as below: cas 12013-47-7 suppliers

Prev:Optical properties of Er3+, Yb3+ co-doped Calcium zirconate (cas 12013-47-7) phosphor and temperature sensing efficiency: Effect of alkali ions (Li+, Na+ and K+)
Next:Photoinduced electron transfer reactions of pyrylium derivatives with organic sulfides in acetonitrile)