New design of sapphire joints brazed with bismuth-borate glass

Add time:08/17/2019    Source:sciencedirect.com

Bismuth-borate glass, 50Bi2O3–50B2O3 (mol%), was prepared and employed to braze sapphire in air. Prior to the joining process, the structure and mechanical and thermal parameters of the glass were investigated. Additionally, the wettability of the glass on sapphire was found to be good. Subsequently, sapphire was successfully brazed at 600–750 °C with a dwelling time of 20 min. The microstructure evolution of the joint with respect to the temperature was investigated. The results showed that Al4B2O9 whiskers were formed in situ in the joint as a result of the chemical reaction between the glass and sapphire. The size of the Al4B2O9 whiskers increased with the temperature. The mechanical integrity of the joints was also studied. With the increase in the temperature, the shear strength first increased and then decreased; the maximum value of 95 MPa was observed at 650 °C. Additionally, the effects of the dwelling time on the microstructure and shear strength of the joint brazed at 700 °C were studied, revealing that the size of Al4B2O9 increased and the shear strength decreased with the increase in the dwelling time.

We also recommend Trading Suppliers and Manufacturers of SAPPHIRE POWDER (cas 1317-82-4). Pls Click Website Link as below: cas 1317-82-4 suppliers

Prev:Purification and comprehensive utilization of sapphire kerf waste
Next:Facile fabrication of heat-conducting phosphor-in-glass with dual-sapphire plates for laser-driven white lighting)