Hydrotalcite-derived cobalt–aluminum mixed oxide catalysts for toluene combustion

Add time:08/16/2019    Source:sciencedirect.com

Hydrotalcite-like compounds (HTlcs) containing cobalt and aluminum (intended Co/Al molar ratio = 3.0) were coprecipitated at 30, 50 and 70 °C. Their crystallinity, which was confirmed by powder X-ray diffraction, increased with the precipitation temperature. Furthermore, HTlcs with various cobalt contents were prepared at 70 °C. Thermogravimetric analysis showed that HTlcs were transformed into stable oxides at 550 °C. The decrease in the crystallite size of the formed spinels with the increase in the precipitation temperature was observed. Low temperature sorption of nitrogen revealed meso-macroporous nature of the oxides with extended interparticle porosity. Aluminum segregated on the samples surface, which contained various amounts of lattice and adsorbed/electrophilic oxygen as detected by X-ray electron spectroscopy. The high ratio of lattice to adsorbed/electrophilic oxygen found for the sample with Co/Al = 3:1 caused that it turned out to be the most efficient catalyst in the total oxidation of toluene (50% conversion at 257 °C).

We also recommend Trading Suppliers and Manufacturers of Aluminum cobalt oxide (cas 12672-27-4). Pls Click Website Link as below: cas 12672-27-4 suppliers

Prev:Facile synthesis of aluminium cobalt oxide for dye adsorption
Next:Design, scale-up, and operation of a Rh/Ce0.75Zr0.25O2-δ-ƞ-Al2O3/FeCrAl alloy wire mesh honeycomb catalytic module in diesel autothermal reforming)