MOFs-derived NiFe2O4 fusiformis with highly selective response to Xylene (cas 1330-20-7)

Add time:08/22/2019    Source:sciencedirect.com

NiFe2O4 fusiformis was derived from Ni/Fe bimetal metal-organic frameworks (MOFs) precursors prepared using a facile hydrothermal method, and the corresponding morphology, microstructure, and gas sensing properties were investigated. After thermal treatment at 350 °C in air, the Ni/Fe MOFs ellipsoid were completely converted into NiFe2O4 fusiformis, leading to a big volume shrink because of the removing of organic ligands. The NiFe2O4 fusiformis was used to fabricate gas sensor to detect xylene operating at 300 °C. The sensor exhibited a good response sensitivity of 31.52 with response/recovery time of 50.10 s/40.30 s, respectively, toward 500 ppm xylene. It also showed a remarkably high selectivity to xylene against other gases such as toluene, ethanol, methanol, acetone, isopropanol, ammonia, formaldehyde, and benzene. The excellent performance could be ascribed to the nature and the unique morphology of as-prepared NiFe2O4 with high specific surface area (60.50 m2/g) and porous microstructure. These findings may render a new opportunity to fabricate gas sensor for xylene detection based on p-type NiFe2O4.

We also recommend Trading Suppliers and Manufacturers of Xylene (cas 1330-20-7). Pls Click Website Link as below: cas 1330-20-7 suppliers

Prev:Polymer-infiltrated SiO2 inverse opal photonic crystals for colorimetrically selective detection of Xylene (cas 1330-20-7) vapors
Next:Full Length ArticleTesting the advanced oxidation processes on the degradation of Direct Blue 86 (cas 1330-38-7) dye in wastewater)