Removal of 4-Chlorophenol (cas 106-48-9) from water using different carbon nanostructures: A comparison study
-
Add time:08/26/2019 Source:sciencedirect.com
In this research, performance of different carbon structures including multiwalled carbon nanotubes (MWNT), single walled carbon nanotubes (SWNT), carbon nanofibers (CNF), nano carbon (NC), nanoporous graphene (G) and mesoporous carbon (CMK) was studied as sorbents for removal of 4-Chlorophenol (cas 106-48-9) (4-CP) from water. Nanostructures were synthesized and their morphologies studied by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The structure and surface properties of carbon nanostructures were characterized using XRD, BET and Raman spectrometry. In several batch adsorption experiments, the effect of main factors including pH, temperature, time, and pollutant concentration on the adsorption of 4-chlorophenol as a chlorinated organic compound has been investigated. The results revealed proper consistency of adsorption data with Freundlich and Langmuir adsorption isotherms. For all nanostructures, the pseudo-second-order model was the most suitable model to describe the adsorption kinetics. Furthermore, thermodynamic parameters related to each sorbent were calculated and compared. Finally the sorbents were compared according to results of regeneration-reuse cycles. The optimum pH for 4-CP removal was obtained to be 5.0–7.0. The obtained equilibrium adsorption capacities were in the range of 58.82 to 334.34 mg g− 1 for various nanostructures due to their different surface properties.The obtained results showed that the adsorption trend was as CMK-3n > porous graphene > MWCNT > Carbon nanofiber > SWCNT, in which the CMK-3 possessed the highest equilibrium adsorption capacity and retained near 90% of its initial adsorption capacity even after 3 regeneration-reuse cycles.
We also recommend Trading Suppliers and Manufacturers of 4-Chlorophenol (cas 106-48-9). Pls Click Website Link as below: cas 106-48-9 suppliers
Prev:Promotional effect of metal doping on nanostructured TiO2 during the photocatalytic degradation of 4-Chlorophenol (cas 106-48-9) and naproxen sodium as pollutants
Next:New organic semiconductor thin film derived from p-Toluidine (cas 106-49-0) monomer) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Promotional effect of metal doping on nanostructured TiO2 during the photocatalytic degradation of 4-Chlorophenol (cas 106-48-9) and naproxen sodium as pollutants08/25/2019
- 4-Chlorophenol (cas 106-48-9) biodegradation facilitator composed of recombinant multi-biocatalysts immobilized onto montmorillonite08/24/2019
- Regular ArticleThe determination of 2-phenylphenol in the presence of 4-Chlorophenol (cas 106-48-9) using nano-Fe3O4/ionic liquid paste electrode as an electrochemical sensor08/23/2019
- Effect of fulvic acid coating on biochar surface structure and sorption properties towards 4-Chlorophenol (cas 106-48-9)08/22/2019
- Visible-light-responsive surface-modified TiO2 powder with 4-Chlorophenol (cas 106-48-9): A combined experimental and DFT study08/21/2019
- Spray-dried microporous Pt/TiO2 degrades 4-Chlorophenol (cas 106-48-9) under UV and visible light08/20/2019
- Non-toxic poly(vinyl alcohol)/clay composites as electrode material for detection of 4-Chlorophenol (cas 106-48-9) and 4-nitrophenol08/19/2019
- Novel Fenton-like system (Mg/Fe-O2) for degradation of 4-Chlorophenol (cas 106-48-9)08/18/2019