Removal of silicon from highly acidic HCl medium to produce purified TiO2
-
Add time:08/18/2019 Source:sciencedirect.com
A low content of Si is an important characteristic of most Ti metal alloys, and low Si content in Ti sponge from the Kroll process is consistently achievable by the chlorination and distillation step. However, alternative routes are being explored to reduce Ti-metal production costs. One promising approach is a direct TiO2 reduction route called the HAMR (Hydrogen-Assisted Magnesio-thermic Reduction) process, which requires a low-cost, high-purity TiO2—preferably with a coarse particle size distribution (PSD). Although a satisfactory TiO2 can be produced by the chloride process, an alternative route called the ARH (Alkaline-Roasting and Hydrolysis) process has been developed, which produces an excellent feedstock for the HAMR process via hydrolysis in HCl medium. But, the purity of hydrolyzed TiO2 powder produced by the ARH process is affected by the purity of the Ti-bearing acid solution before the hydrolysis step, and Si has been determined to be the most detrimental impurity in the solution, since it will co-precipitate with titanium. Thus, the objective of this work is to clarify the behavior of Si in HCl solution, and to identify a viable approach for the desilication of Ti-bearing acid solution. The effects of acid concentration, temperature, and select ionic species on Si behavior in the acid medium were investigated, and a seeded silica-gel adsorption strategy was tested. The desilication treatment developed in this work has been shown to be capable of achieving Si solution concentrations of < 20 mg/L in acidic solution, corresponding to a Si concentration in the intermediate TiO2 of < 0.024% wt/wt, which is sufficient to meet ASTM standards for Si in the Ti-powder after direct reduction.
We also recommend Trading Suppliers and Manufacturers of (R)-3-AMino-2-Methylpropanoic acid-HCl (cas 132605-98-2). Pls Click Website Link as below: cas 132605-98-2 suppliers
Prev:An efficient synthesis of (R)- and (S)-2-(aminomethyl)piperidine dihydrochloride
Next:Water osmosis in separating acidic HCl/glyphosate liquor by continuous diffusion dialysis) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Research PaperAmino acids modified konjac glucomannan as green corrosion inhibitors for mild steel in HCl solution08/26/2019
- Electronic/atomic level fundamental theoretical evaluations combined with electrochemical/surface examinations of Tamarindus indiaca aqueous extract as a new green inhibitor for mild steel in acidic solution (HCl 1 M)08/25/2019
- Diffusion dialysis for separating acidic HCl/glyphosate liquor08/24/2019
- Kinetic mechanics of the reactions between HCl/HF acid mixtures and sandstone minerals08/23/2019
- Enhanced corrosion inhibition performance of novel modified polyaspartic acid on carbon steel in HCl solution08/22/2019
- Enhanced corrosion inhibition effect of tannic acid in the presence of gallic acid at mild steel/HCl acid solution interface08/21/2019
- Gravimetric, electrochemical surface and density functional theory study of acetohydroxamic and benzohydroxamic acids as corrosion inhibitors for copper in 1 M HCl08/20/2019
- Water osmosis in separating acidic HCl/glyphosate liquor by continuous diffusion dialysis08/19/2019


