CO2 solubility measurement and thermodynamic modeling for 1-Methylpiperazine (cas 109-01-3)/water/CO2

Add time:08/22/2019    Source:sciencedirect.com

An accurate thermodynamic model is the primary element needed for the process simulation and optimization for CO2 absorption in aqueous amine solutions. In this work, the thermodynamic model was built in Aspen Plus, using the electrolyte nonrandom two-liquid (ENRTL) activity coefficient model to represent vapor pressure and heat capacity data, simultaneously, for amine, vapor–liquid equilibrium (VLE), excess enthalpy (HE), and pKa data for amine/H2O, and CO2 solubility data for amine/CO2/H2O. The cyclic diamine 1-methylpiperazine (1MPZ) is a promising amine for CO2 capture. CO2 solubility was measured for 1MPZ aqueous solutions at three concentrations – 10 wt%, 30 wt%, and 40 wt% and four temperatures – 313.15 K, 343.15 K, 373.15 K, and 393.15 K. The excess enthalpy for 1MPZ + H2O was obtained by the Setaram C80 calorimeter at 303.15 K and 323.15 K, within a whole mole-fraction range. The interaction parameters of nonrandom two-liquid model (NRTL) and ENRTL, along with the standard state properties of amine ions – protonated 1MPZ (1MPZH+, 1MPZH2+), 1MPZ carbamate (1MPZCOO−), and protonated 1MPZ carbamate (H1MPZCOO) – were regressed from data obtained from this work as well as literature, which agreed with the model calculation.

We also recommend Trading Suppliers and Manufacturers of 1-Methylpiperazine (cas 109-01-3). Pls Click Website Link as below: cas 109-01-3 suppliers

Prev:An Original Strategy for the Analysis of Degradation Products in CO2 Capture Emissions: Monitoring of an Innovative Blend 1-Methylpiperazine (cas 109-01-3)/piperazine/water in Pilot Conditions☆
Next:NBO, HOMO, LUMO analysis and vibrational spectra (FTIR and FT Raman) of 1-Amino 4-methylpiperazine using ab initio HF and DFT methods)