Measurements for the dissociation conditions of methane hydrate in the presence of 2,5-dihydrofuran and 3,4-Dihydro-2H-pyran (cas 110-87-2)

Add time:08/20/2019    Source:sciencedirect.com

This study reports the equilibrium conditions for the dissociation of methane hydrate in the presence of cyclic ethers of 2,5-dihydrofuran (C4H6O) and 3,4-dihydro-2H-pyran (C5H8O) as additives. For the water-soluble additive of 2,5-dihydrofuran, the hydrate–liquid water–vapor (H–Lw–V) three-phase equilibrium conditions were measured using the isochoric method in the pressures ranging from 6 to 12 MPa and temperatures ranging from 291 to 300 K. For the water-insoluble additive of 3,4-dihydro-2H-pyran, the hydrate–liquid water–liquid additive–vapor (H–Lw–La–V) four-phase equilibrium conditions were measured in the same pressure range with temperature range from 296 to 300 K. The experimental results show that both additives have significant promotion effects on the formation of methane hydrates. At a specific pressure, the maximum increase in methane hydrate equilibrium temperature is approximately 13 K for both additives. In order to simulate the seawater environment, this study also measured the methane hydrate dissociation conditions by adding these two additives to a brine system with 0.035 mass fraction NaCl. The equilibrium temperature at an isobar of the brine system shows a decrease of 1–2 K for both additives in comparison to that of the pure aqueous system.

We also recommend Trading Suppliers and Manufacturers of 3,4-Dihydro-2H-pyran (cas 110-87-2). Pls Click Website Link as below: cas 110-87-2 suppliers

Prev:Spatially resolved structure and dynamics of the hydration shell of Pyridine (cas 110-86-1) in sub- and supercritical water
Next:Unusual annulation reaction of electron-deficient alkenes with enamines: an easy access to stereocontrolled 4-fluoroalkylated 3,4-Dihydro-2H-pyran (cas 110-87-2)s)