Preparation of phosphotungstic acid based poly(ionic liquid) and its application to esterification of palmitic acid

Add time:08/21/2019    Source:sciencedirect.com

For biodiesel production from waste cooking oils with high acid values, an inefficient esterification pretreatment is always conducted to convert free fatty acids (FFAs) before alkali-catalysed transesterification process. In this paper, phosphotungstic acid based poly(ionic liquid) was prepared to catalyse the esterification of palmitic acid with methanol while the required catalyst dosage was much lower than commercial Amberlyst-15. And the catalyst was characterized by 31P CP-MAS NMR, FTIR, SEM, XRF and TG. Among the three poly(ionic liquid)s prepared in this paper, phosphotungstic acid based poly(ionic liquid) was selected to be the most suitable catalyst for esterification because the catalyst could be reused for more than 5 times without significant deactivation. According to single factor analyses, the esterification yield could reach 91.6% after 8 h while the reaction temperature, methanol to acid molar ratio and catalyst dosage were 65 °C, 6 and 3% wt, respectively. Afterwards, palmitic acid was proposed to be first adsorbed on the catalyst before reacting with methanol. Finally, a palmitic acid adsorbed Eley-Rideal model was employed to analyse the reaction and the adsorption mechanism was assumed as well.

We also recommend Trading Suppliers and Manufacturers of PALMITIC ACID N-BUTYL ESTER (cas 111-06-8). Pls Click Website Link as below: cas 111-06-8 suppliers

Prev:Editor’s choice paperSynthesis and characterization of arabinose-palmitic acid esters by enzymatic esterification
Next:ReviewAre chloropropanols and glycidyl fatty acid esters a matter of concern in palm oil?)